Tulip Contacts/Clusters are generally used in Medium and/or High Voltage switch gear devices.The contact fingers are intended for electrical current transmission and disconnection from a circuit breaker to a It’s also known as Primary Moving Contact for the usage in primary circuit. Tulip contact consists of contact plates, support frame, pull spring and spring fingers. Numbers of contact plates are assembled on the support frame which is a ring to form an annular entirety.switch gear panel by providing a contact finger-trap. QYA series tulip contact is self-developed successfully on the basis of digesting and absorbing the technology of imported products. It can replace the domestic products of imported the same kind products and can be widely used in ZN63 (VS1, VBI), VD4/HD4, or other handcart type circuit breakers. Tulip Contact is an electrical equipment device which frame material is non-magnetic stainless steel and be used in the primary circuit such as medium-high-voltage vacuum circuit breakers, middle-placed cabinet and handcarts. It’s also known as Primary Moving Contact for the usage in primary circuit. The tulip contact socket silver plating tooling can overcome shortcomings of plating missing and poor bonding force due to air vortex, thereby reducing cost and waste.